| Name | Reiner Rongeur |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Bone Rongeurs |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Lexis Industry |
| Sterility | Non-Sterile |
| Usage | Reusable |
Reiner Rongeur
Reiner Rongeur
7″ (17.8 cm)
Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Description
Reviews (0)
Shipping & Delivery
Related products
Distraction Screws
Distraction Screws
package of 5Distraction Screws are an accessory that is usually used alongside distractors or a distraction screwdriver that is spec. These screws are ideally suited for use in spinal surgeries specifically in minimally invasive procedures. These instruments are designed to distract disc space to allow a clearer view of the surgical field to ensure adequate space for the surgeon to perform the spinal surgery. These screws are available in three sizes 14.0 mm, 16.0 mm and 18.0 mm in a package of 5.
Bane Bone Rongeur
Bane Bone Rongeur is a specialized instrument made for manipulation of bone. It can be used to do tings like clip bone into smaller fragments or to chip or gnaw away at a particular areas of bone in repair of fractures or simply in increasing access to the surgical field. This instrument features jaws that are 5.0 mm wide and are curved which makes it better suited to mirror the contours of certain areas of the body.
Blumenthal Rongeur
Blumenthal Rongeur is a versatile instrument that is useful in a variety of surgical scenarios. This instrument is designed with jaws that can be used to grasp at bone or other hard tissue surfaces and chip or cut away at it. Under the manual control of surgeon it can be used to gnaw away at surfaces such as cartilage for remodeling during surgery. This particular instrument is available with beaks at 30, 45 or 90 degree angles making it uniquely able to grasp tissue in areas that are difficult to reach with other instruments.
Bone Clamp
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Depth Gauge
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Bone Clamp (Reposition Forceps)
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8" (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Bone Graft Impactor (Caspar Type)
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Bone Reduction Forceps
Bone Reduction Forceps - 2" Ratchet
2" ratchet allows opening jaws to 4", 8" (20.0 cm)
Bone Reduction Forceps are an ideal addition to any operating procedures. These forceps are crafted for use in grasping bone to aid in realignment and setting of fractures and breaks. The most unique aspect of this particular instrument is that it features a 2" ratchet which allows the jaws to open to 4" making it able to fit a vast array of surgical scenarios where other instrumentation would not suffice.
Reviews
There are no reviews yet.