| Name | Wire Twisting Forceps |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;010286;01-0286;PM914;PM-914;1440-15; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Lexis Industry |
| Sterility | Non-Sterile |
| Usage | Reusable |
Wire Twisting Forceps
13.0 mm jaw length, 5-1/2″ (14.0 cm) Wire Twisting Forceps are specially designed forceps required to manipulate and twist off wire after it has been secured. Many procedures require the use of wire to stabilize a graft or to give the areas that was operated on additional support. This confers additionally stability thus reducing likelihood of trauma during the recovery period. Often the wire segments that are inserted must be secured by twisting. This instrument features jaws with serrations on them that allow for reduced slippage.
Description
Reviews (0)
Shipping & Delivery
Related products
Diamond Pin Wire Cutter
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm) Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Flat Nose K-Wire Pliers
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Hercules-Type Wire Cutter – 4.0 mm Wire Max
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Boehler Wire & Pin Extractor
Boehler Wire & Pin Extractor can be used in a variety of procedures to manipulate surgical pins and wire. Many orthopedic procedures such as repair of fractures or insertion of support after laminectomy procedures require the use of wire or pin. These added support confer additional stability to the bone and increase the speed of healing while reducing the damage done by trauma. This particular instrument can be used to insert, remove and reshape wires and pins as they are needed. This instrument is available in three different sizes to satisfy a variety of patient needs and surgeon preferences.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Kirschner Bow
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
K-Wire Side Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Reviews
There are no reviews yet.